Miniature4k.com aims to reach as many fans as possible the diversity that exists in the world of fantastic miniatures at reduced prices.
Quality politics.
We use high quality UV resins and the printed parts are SOLID in their entirety (this is important for their use). For incredible detail and sharpness results, the layer height is set to 0.02mm.
The images on our website are indicative, and may represent the miniatures in their final state, but they are sent unpainted and unassembled, as is common with 3D printing, some parts may not fit perfectly together and require light sanding. Most parts are relatively easy to assemble, if you have any questions or concerns during assembly please contact us.
If any product sent by miniature4k.com is not as described, return it to us unassembled, we will resend it free of charge and reimburse you for the shipping costs.
We use 4K resolution 3D printers. To obtain the greatest number of details and sharpness, in the printing process, “large number of supports” are used. Subsequently the miniature is reviewed and these supports are removed, however there may be some unimportant point that requires light sanding, although it will probably not be appreciated after painting.
However, if you are not satisfied with the quality, you can return the miniature within 14 days of receipt and we will send you a new one. (if not damaged)
For more information see our return policy
Breakdown of the scales of the model.
• 28mm is the standard humanoid size for most RPGs.
• 32mm is the standard size for thumbnails in most games.
• 40mm is a commonly used base wargaming size.
• 50mm is a large creature in most RPGs.
• 60mm is a commonly used wargaming base size
• 75mm is a large creature in most RPGs
• 100mm is a gigantic-sized creature in most RPGs.
The scale is adjusted from “the ground” (not counting the base that is usually 2 to 3mm) to the height of the eyes of the miniature in humanoid creatures or with proportions adjusted to this standard. If this is not possible we adjust the total height to the requested scale.
3D printing is almost an artisan process and the scales move in millimeters. At miniature4k.com we try to adjust as much as possible to the established standards, however there is a margin of error, always upwards, from + 3% to + 5%. For example 32 scale can range 32-34mm
Remember also that miniatures are not toys. They can be dangerous if chewed or ingested, so they are not suitable for children under 14 years of age.
If you have any questions or suggestions, do not hesitate to write to us at info@miniature4k.com or send whatsapp at +34 616 239 377 from Monday to Friday 9:00 a.m. to 1:30 p.m.